From 9d3eaebc2772bd9db06d84b4545dd2c467cd2dd8 Mon Sep 17 00:00:00 2001 From: Stonewall Jackson Date: Thu, 25 May 2023 23:02:48 -0400 Subject: new post: building-a-personal-voip-system --- src/blog/building-a-personal-voip-system/index.md | 991 ++++++++++++++++++++++ src/css/style.css | 9 + 2 files changed, 1000 insertions(+) create mode 100644 src/blog/building-a-personal-voip-system/index.md (limited to 'src') diff --git a/src/blog/building-a-personal-voip-system/index.md b/src/blog/building-a-personal-voip-system/index.md new file mode 100644 index 0000000..da09c86 --- /dev/null +++ b/src/blog/building-a-personal-voip-system/index.md @@ -0,0 +1,991 @@ +--- +title: Building a Personal VoIP System +date: May 25, 2023 +description: Take control of your telephony with Asterisk! +--- + +I've always been a big [self-hoster](https://github.com/sacredheartsc/selfhosted), +but had never attempted anything related to VoIP. I recently purchased some IP +phones and set up a personal home phone network using [Asterisk](https://www.asterisk.org/). +This guide will help you set up your own digital telephone system using +open-source tools. + +This guide is written for those who are experienced with self-hosting, but are +totally unfamiliar with VoIP. Therefore, I'm going to gloss over certain +uninteresting technicalities for the sake of brevity. + + +## SIP: A Brief Introduction + +Before getting your hands dirty with phone configuration and Asterisk dialplans, +it's worth taking some time to understand the underlying network protocols +involved. This will pay dividends later on when you're debugging the inevitable +connectivity issues with your voice calls (trust me). + +The [Session Initialization Protocol](https://www.ietf.org/rfc/rfc3261.txt), or +SIP, is a signaling protocol used by basically every digital telephony device +produced in the last two decades. VoIP phones, softphones, office conferencing +devices...they all use SIP. SIP can use either TCP or UDP, and usually listens +on port 5060. + +There are two really important things you need to know about about SIP. + + 1. SIP does **not** carry the voice data. It's just a signaling protocol, + and it's only used to negotiate which IP address, port, and audio format + should be used to carry the audio stream. + + 2. SIP was initially released in 1999, and was designed with the assumption + that each device has its own globally routable public IP address. After + all, the IPv6 standard was released back in 1995, and NAT would soon be a + thing of the past...right? Unforunately, this did not end up being the case. + +For example, let's say we have a standard home network with two VoIP phones in +the local 192.168.1.0/24 subnet. Consider what happens when these two phones want +to call each other. In plain English, the SIP handshake will go something like +this: + +> Hello 192.168.1.6.
+> I would like to place an audio call using the G.711 codec.
+> Please send your audio frames to me at address 192.168.1.5, port 20000. + +> Hi there, 192.168.1.5!
+> Sure, I support the G.711 codec.
+> Please send your audio frames to me at address 192.168.1.6, port 30000. + +Each phone randomly chooses an unused UDP port on which to receive the other +party's audio stream. After the SIP negotiation, they will both send voice data +to each other using the [Real-Time Transport Protocol](https://www.rfc-editor.org/rfc/rfc3550), +or RTP. Since they are both on the same local network, this works fine. + +### NAT Problems + +Now consider what happens when we call someone _outside_ of our local network. +Let's say our router has a public IP of 203.0.113.8, and our friend Alice has +address 198.51.100.7. + +> Hello 198.51.100.7. Is Alice there?
+> I would like to place an audio call using the G.711 codec.
+> Please send your audio frames to me at address 192.168.1.5, port 20000. + +> Hi there, "192.168.1.5". I see you have source IP 203.0.113.8...strange!
+> Sure, I support the G.711 codec.
+> Please send your audio frames to me at address 198.51.100.7, port 30000. + +Thanks to [network address translation](https://en.wikipedia.org/wiki/Network_address_translation), +or NAT, we are able to make the SIP connection to Alice. Unfortunately, you +will probably find that audio only works in one direction! + +We've got two problems. First, we've asked Alice to send her audio to our _local_ +IP address, which won't route over the Internet. Luckily, most devices are smart +enough to use the source address of the incoming packet when these don't match up. +So Alice's audio stream will probably end up at our router. + +But second, our router will still block all of her audio traffic! When it receives +a UDP packet from Alice's audio stream, there's no stateful NAT connection to +match it back to an internal client, so it's silently dropped. Sad! + +### NAT Solutions + +There are three ways to solve this problem. + +1. Give each of your SIP devices its own public IP (probably not feasible). + +2. Use a SIP [Application Layer Gateway](https://www.voip-info.org/routers-sip-alg/). + This is a horrible feature offered by some routers. Basically, it deep-packet-inspects + your SIP traffic, rewrites the headers, and creates port forwards on-the-fly + to make sure the inbound audio stream makes its way to your device. + + SIP ALGs are a total hack and notoriously buggy. In addition, when you decide + to encrypt your SIP traffic using TLS, they quit working altogether. + +3. Configure a fixed RTP port range on each of your SIP devices, then create + static port forwarding rules on your router for each device. This is really + the only decent option. + + Note that since we'll be using Asterisk, you also have the option of + "proxying" all your audio streams through the Asterisk box--then you only + have one port forward to set up (we'll get to that later). + + +## Asterisk: What _is_ it? + +[Asterisk](https://www.asterisk.org/) is an open-source implementation of a +[private branch exchange](https://en.wikipedia.org/wiki/Business_telephone_system#Private_branch_exchange), +or PBX. If you're a VoIP novice like I was, this is probably meaningless to you. + +A PBX is the central brain of any private telephone network. The general idea is +this: You plug a bunch of dumb telephones into one side of the PBX, and you plug +one or more uplinks to the [PSTN](https://en.wikipedia.org/wiki/Public_switched_telephone_network "Public Switched Telephone Network") +into the other side. The PBX lets the internal phones dial each other using +private internal extensions, while multiplexing calls to and from the PSTN. It +also handles advanced features like voicemail, call queues, hunt groups, and +interactive menus for callers. + +In the old days, the PBX would be a huge box down in the server room with a +rat's nest of of RJ-11 telephone cables sprawling out, connecting it to every +single phone in the office. These monstrosities have since been replaced with +software-based PBXes that talk SIP over standard Ethernet networks. Asterisk is +the de-facto open source PBX. + + +## Jargon Glossary + +Before we get started, you need to know some lingo. Asterisk is an _old_ project, +with an unintuitive configuration. Hopefully this section will help you decipher +some of the documentation and setup guides you find out there. + +Extensions +: Technically, in Asterisk parlance, any dialed number is an extension. In + practice though, an _extension_ typically refers to a _local_ phone number + (like 6001) with an associated SIP account. While extensions can be + alphanumeric, virtually no one does this--most people use 3- or 4-digit + numbers. + +Queues +: Asterisk [queues](https://www.voip-info.org/asterisk-call-queues/) are a + mechanism for managing incoming callers. You can configure which local + extensions should ring for each queue, and even play custom music while + callers are waiting. + +SIP Trunk +: A "SIP Trunk" is just a fancy term for your upstream telephone provider. For + example, if you subscribe to a provider like [VOIP.ms](https://voip.ms/en/invite/MzU5Nzc4), + they'll give you a public phone number and a SIP server to connect to, along + with a username and password. This is your "SIP Trunk." + +DID +: A DID, or "Direct Inward Dial," is the technical term for a public phone number. + +Contexts +: In Asterisk, every call is assigned a _context_. The context is simply a + name of your choosing, and you specify it when you configure each extension + or SIP trunk. For example, I give all my internal phones a context called + `from-home`, and I give my SIP trunk a context called `from-pstn`. + +Dialplan +: The Asterisk [dialplan](https://wiki.asterisk.org/wiki/display/AST/Dialplan) + is an arcane scripting language where you define what happens when you dial a + number or an incoming call is received. The dialplan is the glue between the + _extensions_ and _contexts_ described above. The syntax is fairly unintuitive, + but don't worry! We'll walk through it in a later section. + +Codecs +: A codec is a type of digital encoding used for the audio stream over the + wire. Every VoIP device supports one or more codecs, and you need at least + one common codec with the other party to make calls. When no shared codecs + are supported, Asterisk has the ability to do man-in-the-middle transcoding. +
+ [G.711](https://en.wikipedia.org/wiki/G.711) is basically the only codec with + universal support. It has two versions: `ulaw` (North America/Japan) and + `alaw` (everywhere else). I use a higher quality codec ([G.722](https://en.wikipedia.org/wiki/G.722)) + for internal calls, and let Asterisk transcode down to G.711 when I call out + to the PSTN. + +BLF / Presence +: The BLF, or busy lamp field, is a little LED on your VoIP phone that lights + up when one of your contacts is using their line. In Asterisk, this functionality + is enabled by something called a [presence subscription](https://wiki.asterisk.org/wiki/display/AST/Configuring+res_pjsip+for+Presence+Subscriptions). + +SIP / PJSIP +: On some guides online, you will see references to the `chan_sip` and `chan_pjsip` + modules. `chan_sip` is the legacy Asterisk SIP implementation. You should be + using PJSIP for everything these days. + + +## Step 1: Acquire an IP Phone + +First, you will need one or more VoIP phones. Any device that supports SIP +calling should work fine with Asterisk, so this mostly comes down to personal +preference. + +As a beginner, you'll probably want to select for ease of configuration. Most +modern VoIP phones expose a friendly web GUI where you configure all your SIP +accounts, ring settings, etc. I'd also recommend avoiding any devices that +rely on proprietary setup tools. + +Personally, I've had zero problems with Yealink devices. I recommend the [T54W](https://www.yealink.com/en/product-detail/ip-phone-t54w) +model for a desk phone, or the [W73P](https://www.yealink.com/en/product-detail/dect-phone-w73p) +if you prefer a cordless model. You can buy these new at the usual online retailers, +but eBay often has used models for sale if you want to save some money. + +If you don't want to buy a physical device, you can also use a softphone app +like [Linphone](https://f-droid.org/en/packages/org.linphone/). I use it on my +Android phone running [GrapheneOS](https://grapheneos.org/), and it works well +with the right settings. I'll cover Linphone in a later section. + + +## Step 2: Subscribe to a VoIP Provider + +Next, you need to subscribe to a VoIP service so you can make and receive calls +over the PSTN. You'll often see people call this a "SIP Trunk." + +Basically, you pay a VoIP company a small monthly fee, usually $3-$5 per month +for a single DID. In exchange, they give you a public telephone number, along +with credentials for their SIP server. After configuring Asterisk to connect to +that SIP server, you can make and receive calls via the PSTN with that number. + +I can personally recommend two providers. + +1. [VOIP.ms](https://voip.ms/en/invite/MzU5Nzc4) is an inexpensive provider with + servers in the USA, Canada, and western Europe. You can get "unlimited" + calling with a single DID for about $5 a month, or less if you pay by the + minute. + + VOIP.ms also supports call encryption via TLS/SRTP, which is nice. + +2. [JMP.chat](https://jmp.chat/) (USA/Canada only) is an XMPP-based service that + lets you make and receive voice calls and SMS/MMS messages using your + existing XMPP account. I especially like JMP because there's already tons of + high-quality native XMPP apps for both desktop and mobile devices. In + addition, their entire stack is open source. + + While JMP is primarily focused on XMPP calling, they also provide you with + a SIP account that you can use with Asterisk. + +There are _tons_ of other VoIP providers out there, so shop around. + + +## Step 3: Configure Asterisk + +Now you're ready to set up Asterisk. These instructions are written for RHEL-based +distributions, but should be applicable to other Unixen. + +### Installation + +First, install Asterisk: + +```bash +dnf install asterisk asterisk-pjsip asterisk-voicemail-plain +``` + +You'll also need the sound files. Some distributions include these with their +Asterisk package (EPEL does not). + +```bash +for codec in g722 g729 gsm sln16 ulaw wav; do + curl -sL "https://downloads.asterisk.org/pub/telephony/sounds/asterisk-core-sounds-en-${codec}-current.tar.gz" \ + | tar xvz -C /usr/share/asterisk/sounds +done +``` + +### Network Configuration + +Now we're ready to edit some config files. If you're behind a NAT (likely), you'll +need to start by telling Asterisk about your local network. Edit `/etc/asterisk/pjsip.conf` +and add some transport templates. + +```lisp +; /etc/asterisk/pjsip.conf + +; This template contains default settings for all transports. +[transport-defaults](!) +type = transport +bind = 0.0.0.0 + +; For communication to any addresses within local_nets, Asterisk will not apply +; NAT-related workarounds. +local_net = 127.0.0.0/8 +local_net = 10.0.0.0/8 +local_net = 172.16.0.0/12 +local_net = 192.168.0.0/16 + +; If you have a public static IP for your Asterisk server, set it here. +external_media_address = 203.0.113.8 +external_signaling_address = 203.0.113.8 + + +; The following UDP and TCP transports will inherit from the defaults. +[transport-udp](transport-defaults) +protocol = udp + +[transport-tcp](transport-defaults) +protocol = tcp +``` + +Remember our discussion about NAT and RTP audio streams above? We also need to +set up a static port range for incoming UDP audio traffic. Choose a suitable +range for your Asterisk server in `rtp.conf`. Then, set up port forwarding on +your router/firewall to forward all incoming UDP traffic within that range to the +internal IP of your Asterisk server. + +**If your Asterisk server is behind NAT and you forget to do this, you'll experience +one-way audio in your phone calls.** + +```lisp +; /etc/asterisk/rtp.conf + +[general] +rtpstart=20000 +rtpend=20999 +``` + +### SIP Trunks + +Next, we'll configure our SIP trunk(s). I'll be using `pjsip_wizard.conf`, since +the PJSIP Wizard configuration style eliminates a ton of boilerplate. +For this step, you'll need a server hostname and port, along with the username +and password provided by your upstream SIP provider. + +```lisp +; /etc/asterisk/pjsip_wizard.conf + +; This template contains default settings for all SIP trunks. +[trunk-defaults](!) +type = wizard + +; Require SIP authentication. +sends_auth = yes + +; Require SIP registration. +sends_registrations = yes + +; Send media to the address and port on the incoming packet, regardless of what +; the SIP headers say (NAT workaround). +endpoint/rtp_symmetric = yes + +; Rewrite the SIP contact to the address and port of the request (NAT workaround). +endpoint/rewrite_contact = yes + +; Send the Remote-Party-ID SIP header. Some providers need this. +endpoint/send_rpid = yes + +; Force the ulaw codec, which should work for everything in North America. +endpoint/allow = !all,ulaw + +; Call encryption is out of scope for this guide. +endpoint/media_encryption = no + +; If registration fails, keep trying ~forever. +registration/max_retries = 4294967295 + +; Don't assume an authentication failure is permanent. +registration/auth_rejection_permanent = no + +; Perform a connectivity check every 30 seconds. +aor/qualify_frequency = 30 + + +; Your SIP trunks go here. For this example, we'll assume you're using VOIP.ms. +; You can pick whatever section name you like, as long as its unique. +[voipms](trunk-defaults) +; You almost certainly want to use TCP. +transport = transport-tcp + +; Hostname and port for your SIP provider. +remote_hosts = atlanta2.voip.ms:5060 + +; Choose a context name for incoming calls from this account. You'll use this +; name in your dialplan. +endpoint/context = from-pstn + +; Your SIP provider will give you these credentials. +outbound_auth/username = 555555 +outbound_auth/password = s3cret +``` + +### Local SIP Extensions + +In the same file, we'll also configure our local extensions. You'll need an +extension for each VoIP handset or softphone within your network. I'll be +using a prefix of `6XXX` for local extensions, but feel free to use whatever +convention you prefer. + +The following example has three extensions: two dedicated VoIP +handsets, and one Android softphone. Note that if you want +to use a softphone outside of your local network, you'll need to either open +your Asterisk instance to the world (strongly discouraged) or set up some kind +of VPN. + +```lisp +; /etc/asterisk/pjsip_wizard.conf + +; This template contains default settings for all local extensions. +[extension-defaults](!) +type = wizard + +; Require clients to register. +accepts_registrations = yes + +; Require clients to authenticate. +accepts_auth = yes + +; When simultaneous logins from the same account exceed max_contacts, disconnect +; the oldest session. +aor/remove_existing = yes + +; For internal phones, allow the higher quality g722 codec in addition to ulaw. +endpoint/allow = !all,g722,ulaw + +; Context name for BLF/presence subscriptions. This can be any string of your +; choosing, but I'm using "subscribe". We'll use this in the dialplan later. +endpoint/subscribe_context = subscribe + + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Extension 6001 - VoIP phone +;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +[6001](extension-defaults) +; Dialplan context name for calls originating from this account. +endpoint/context = from-home + +; Voicemail address (note: I'm using the same voicemail address for all extensions) +endpoint/mailboxes = 6000@default + +; Internal Caller ID string for this device. +endpoint/callerid = Living Room <6001> + +; Username for SIP account. By convention, this should be the extension number. +inbound_auth/username = 6001 + +; Password for SIP account (you can choose whatever password you like). +inbound_auth/password = s3cret + +; Maximum number of simultaneous logins for this account. +aor/max_contacts = 1 + +; Check connectivity every 30 seconds. +aor/qualify_frequency = 30 + +; Set connectivity check timeout to 3 seconds. +aor/qualify_timeout = 3.0 + +; IMPORTANT! This setting determines whether the audio stream will be proxied +; through the Asterisk server. +; +; If this device is directly reachable by the internet (either by a publicly +; routable IP, or static port mappings on your router), choose YES. +; +; Otherwise, if this device is hidden behind NAT, choose NO. +endpoint/direct_media = yes + + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Extension 6002 - VoIP phone +;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; (Same settings as above, except for the extension number and password.) +[6002](extension-defaults) +endpoint/context = from-home +endpoint/mailboxes = 6000@default +endpoint/callerid = Kitchen <6002> +inbound_auth/username = 6002 +inbound_auth/password = s3cret2 +aor/max_contacts = 1 +aor/qualify_frequency = 30 +aor/qualify_timeout = 3.0 +endpoint/direct_media = yes + + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Extension 6003 - Linphone app on Android device +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +[6003](extension-defaults) +endpoint/context = from-home +endpoint/mailboxes = 6000@default +endpoint/callerid = Smartphone <6003> +inbound_auth/username = 6003 +inbound_auth/password = s3cret3 +aor/max_contacts = 1 +endpoint/direct_media = no + +; For mobile devices, connectivity checks should be disabled. +; Two reasons for this: +; 1. Poor cellular signal often causes the connectivity check to time out, +; even when nothing is actually wrong. +; 2. Frequent traffic on the TCP session causes constant wakeups and kills +; battery life. +aor/qualify_frequency = 0 +``` + +### Voicemail + +Voicemail recordings are stored on the local filesystem of the Asterisk server. +You can access them by dialing a special voicemail extension from a local phone +(configured in your dialplan). In addition, if you have a local [MTA](https://en.wikipedia.org/wiki/Message_transfer_agent "Mail Transfer Agent") +running, Asterisk can dispatch an email to an address of your choice whenever new +voicemails arrive. + +In the previous section, we referenced a voicemail address called `6000@default` +for our internal extensions. We'll create the actual voicemail box in `voicemail.conf`. + +```lisp +; /etc/asterisk/voicemail.conf + +; This section contains global voicemail options. +[general] +; Audio formats to store voicemail files. +format=wav49|gsm|wav + +; "From:" address used for sending voicemail emails. +serveremail=asterisk-noreply@example.com + +; Whether to attach the voicemail audio file to notification emails. +attach=yes + +; Maximum number of messages per mailbox. +maxmsg=100 + +; Maximum length of a voicemail message in seconds. +maxsecs=300 + +; Maximum length of a voicemail greeting in seconds. +maxgreet=60 + +; How many milliseconds to skip forward/back when rew/ff in message playback. +skipms=3000 + +; How many seconds of silence before we end the recording. +maxsilence=10 + +; Silence threshold (what we consider silence: the lower, the more sensitive). +silencethreshold=128 + +; Maximum number of failed login attempts. +maxlogins=3 + +; Email template for voicemail notifications. +emailsubject=New voicemail ${VM_MSGNUM} in mailbox ${VM_MAILBOX} +emailbody=Hi ${VM_NAME},\n\nYou have a new voicemail in mailbox ${VM_MAILBOX}.\n\nFrom: ${VM_CALLERID}\nDate: ${VM_DATE}\nDuration: ${VM_DUR}\nMessage Number: ${VM_MSGNUM} +emaildateformat=%A, %B %d, %Y at %r + +; Default timezone for mailboxes (defined in zonemessages section below). +tz=myzone + +; Locale for generating date/time strings. +locale=en_US.UTF-8 + +; Minimum voicemail password length. +minpassword=4 + + +; Custom timezone definitions go in this section. +[zonemessages] +myzone=America/New_York|'vm-received' Q 'digits/at' IMp + + +;;;;;;;;;;;;;;;;; +; Voicemail Boxes +;;;;;;;;;;;;;;;;; + +; Each of the following sections describe a voicemail "context," which is a +; a collection of voicemail boxes. If you don't need multiple contexts, you +; can specify "default". +; +; The format is as follows: +; VOICEMAIL_NUMBER => INITIAL_PASSWORD,REAL_NAME,EMAIL_ADDRESS,,, +; +; The last three fields aren't relevant for simple configurations. + +[default] +6000 => 1234,John Doe,johndoe@example.com,,, +``` + +### Queues + +When someone calls our phone number, we'd like all our phones to ring simultaneously +(similar to a traditional landline phone). We can emulate this behavior in Asterisk +using a `ringall` queue. + +Queues are configured in `queues.conf`. + +```lisp +; /etc/asterisk/queues.conf + +; Global queue settings go in this section. +[general] +; Persist dynamic member lists in the astdb. +persistentmembers = yes + +; Some options for more intuitive queue behavior. +autofill = yes +monitor-type = MixMonitor +shared_lastcall = yes +log_membername_as_agent = yes + +;;;;;;;;;;;;;;;;;;; +; Queue Definitions +;;;;;;;;;;;;;;;;;;; + +; The "home-phones" queue is for incoming calls to our home phone line. +[home-phones] +; For each incoming call, ring all members of the queue. +strategy = ringall + +; Max number of seconds a caller waits in the queue. +timeout = 30 + +; Don't announce estimated hold time, etc. +announce-frequency = 0 +announce-holdtime = no +announce-position = no +periodic-announce-frequency = 0 + +; Allow ringing even when no queue members are present. +joinempty = yes +leavewhenempty = no + +; Ring member phones even when they are on another call. +ringinuse = yes + +; Queue Members +; +; Each member is specified with the following format: +; member => INTERFACE,PENALTY,FRIENDLY_NAME,PRESENCE_INTERFACE +; +; The "penalty" value is not interesting for our use case. +; With PJSIP, the BLF/Presence interface is identical to the standard interface name. +member => PJSIP/6001,0,Living Room,PJSIP/6001 +member => PJSIP/6002,0,Kitchen,PJSIP/6002 +member => PJSIP/6003,0,Smartphone,PJSIP/6003 +``` + +### The Dialplan + +At this point, we've configured our upstream SIP trunks, created SIP accounts for +some local phone extensions, and even defined a queue for incoming calls. +All that's left is to glue all this together in a [dialplan](https://wiki.asterisk.org/wiki/display/AST/Dialplan)! + +The dialplan is configured in `extensions.conf`, and it's definitely the least intuitive +aspect of Asterisk. You'll most likely find its syntax to be confusing at first glance. + +The thing to remember is that in the dialplan, everything is an _application_. +Hanging up is performed by the `Hangup()` application, and voicemail prompts are handled +by the `Voicemail()` application. Dialing a phone number is handled by (you guessed it) +the `Dial()` application. Each application can take one or more comma-separated arguments. + +Now, for the syntax. Each dialplan context is marked by square brackets. Each +line within the context is (confusingly) called an _extension_, and has the +following format: + +```lisp +[context-name] +exten => NAME,PRIORITY,APPLICATION() +exten => NAME,PRIORITY,APPLICATION() +; etc... +``` + +The _name_ is the number (or pattern) of the extension. + +The _priority_ defines the order in which the step should be executed. + +Finally, the _application_ performs some action on the call. + +A simple context definition might look something like this: + +```lisp +[from-home] +; ${EXTEN} is a macro which expands to the currently dialed number. +exten => _6XXX,1,Dial(PJSIP/${EXTEN}) +exten => _6XXX,2,Hangup() +``` + +This dialplan section allows internal phones to call each other. +The `_6XXX` is an extension pattern. When a device in the `from-home` +context dials a 4-digit extension beginning with `6`, Asterisk will +ring the corresponding PJSIP account. + + +Because it gets tedious repeating the same extension name over and over, +Asterisk provides some syntactic sugar. The exact same dialplan could also +be written as the following: + +```lisp +[from-home] +exten => _6XXX,1,Dial(PJSIP/${EXTEN}) + same => n,Hangup() +``` + +Below, I've provided a complete Asterisk dialplan for our example VoIP network. +It supports the following features: + + 1. Internal phones can dial each other via their 4-digit extension. + + 2. Internal phones can dial out to the PSTN via standard 10-digit numbers. + + 3. Internal phones can access the voicemail menu by dialing `*99`. + + 4. Internal phones can show BLF/line status for all other phones. + + 5. Incoming calls from the PSTN will ring all internal phones simultaneously. + Callers will be sent to voicemail if no one answers within 25 seconds. + + 6. If your phones support the "auto answer" header, you can initiate a whole-house + intercom by dialing `6000`. + +I'll provide plenty of comments to help you understand the arcane syntax. +Hopefully it will be enough to bootstrap your own dialplan! + +```lisp +; /etc/asterisk/extensions.conf + +; Remember, context names for each SIP account are specified in pjsip_wizard.conf. + +; First, some safeguards against abuse of the built-in contexts. +[public] +exten => _X.,1,Hangup(3) +[default] +exten => _X.,1,Hangup(3) + + +; Next, some global variables. You'll need to change some of these. +[globals] +; Your local area code. +MY_AREA_CODE = 555 + +; Your real name and public phone number. This will be used for outgoing calls +; to the PSTN. +MY_CALLER_ID = John Doe <+5555555555> + +; Dial this number from a local phone to access the voicemail menu. +VOICEMAIL_NUMBER = *99 + +; Voicemail address (configured in voicemail.conf) +VOICEMAIL_BOX = 6000@default + +; Ring for this many seconds before forwarding the caller to voicemail. +VOICEMAIL_RING_TIMEOUT = 25 + +; Name of the 'ringall' queue for local phones. +HOME_QUEUE = home-phones + +; Number to dial for local intercom. +INTERCOM = 6000 + +; Dial pattern for local extensions. +LOCAL_EXTS = _6XXX + + +; Boilerplate to enable BLF/presence subscriptions. Note that the context name +; corresponds to the "endpoint/subscribe_context" value in pjsip_wizard.conf. +[subscribe] +exten => _XXXX,hint,PJSIP/${EXTEN} + + +; This context handles incoming calls from our SIP trunk provider. Each call is +; is placed into a ringall queue. If there is no answer, the caller is forwarded +; to voicemail. +[from-pstn] +exten => _X.,1,Queue(${HOME_QUEUE},nr,,,${VOICEMAIL_RING_TIMEOUT}) + same => n,Answer(500) + same => n,Voicemail(${VOICEMAIL_BOX},su) + same => n,Hangup() + + +; This is a function (or "gosub" in Asterisk lingo) that sets the "auto answer" +; SIP header on an outgoing call. +[gosub-intercom] +exten => s,1,Set(PJSIP_HEADER(add,Alert-Info)=auto answer) + same => n,Return() + + +; This context handles incoming calls from local phones. +[from-home] +; When the INTERCOM number is dialed, page all members of the "home-phones" queue +; into a conference call. +exten => ${INTERCOM},1,Set(CALLERID(all)=Intercom <${EXTEN}> + same => n,Page(${STRREPLACE(QUEUE_MEMBER_LIST(${HOME_QUEUE}),",","&")},db(gosub-intercom^s^1),10) + same => n,Hangup() + +; For local-to-local calls, ring indefinitely. +exten => ${LOCAL_EXTS},1,Dial(PJSIP/${EXTEN}) + same => n,Hangup() + +; When the voicemail number is dialed, dump the caller into the voicemail menu. +exten => ${VOICEMAIL_NUMBER},1,Answer(500) + same => n,VoiceMailMain(${VOICEMAIL_BOX},s) + same => n,Hangup() + +; The following extensions are used to dial out to the PSTN via our SIP trunk, +; using a personalized caller ID string. +; +; Recall that we named our SIP trunk "voipms" in pjsip_wizard.conf. +; +; N matches any digit 2-9 +; X matches any digit 1-9 + +; For numbers formatted as +1xxxxxxxxxx, dial as-is. +exten => _+1NXXNXXXXXX,1,Set(CALLERID(all)=${MY_CALLER_ID}) + same => n,Dial(PJSIP/${EXTEN}@voipms) + same => n,Hangup() + +; For numbers like 1xxxxxxxxxx, add a leading "+". +exten => _1NXXNXXXXXX,1,Set(CALLERID(all)=${MY_CALLER_ID}) + same => n,Dial(PJSIP/+${EXTEN}@voipms) + same => n,Hangup() + +; For numbers without a country code, add a "+1". +exten => _NXXNXXXXXX,1,Set(CALLERID(all)=${MY_CALLER_ID}) + same => n,Dial(PJSIP/+1${EXTEN}@voipms) + same => n,Hangup() + +; For 7-digit numbers, add the local area code. +exten => _NXXXXXX,1,Set(CALLERID(all)=${MY_CALLER_ID}) + same => n,Dial(PJSIP/+1${MY_AREA_CODE}${EXTEN}@voipms) + same => n,Hangup() + +; For 3-digit numbers, like 311, 411, 911 (UNTESTED!!!), dial as-is. +exten => _N11,1,Set(CALLERID(all)=${MY_CALLER_ID}) + same => n,Dial(PJSIP/${EXTEN}@voipms) + same => n,Hangup() +``` + +### Troubleshooting + +Once you've got all your configs in place, give Asterisk a kick: + +```bash +systemctl restart asterisk +``` + +On RedHat-based distributions, you can check `/var/log/asterisk/messages` for +errors. You can also check the systemd journal: + +```bash +journalctl -u asterisk +``` + +You can also get lots of real-time information from the Asterisk console. +To try it out, run the following command as root: + +```bash +asterisk -rvvvvv +``` + +If you're experiencing connectivity issues with your voice calls, you can +enable SIP debugging in the console using the following command: + +```default +pjsip set logger on +``` + +## Step 4: Configure your IP Phones + +The final step is to configure your VoIP phones to connect to your Asterisk server, +and make a few test calls! The instructions here are for Yealink phones, but they +should easily translate to other manufacturers. + +### SIP Account + +Navigate to the IP address of the VoIP phone in your web browser, and log in with the +default username and password (usually `admin/admin`). From here, you should be able to +add a SIP account. In the Yealink interface, this is found under _Account→Register_. + +For the "Living Room" extension we created above, you would set the following: + +- **Register Name:** 6001 +- **Username:** 6001 +- **Password**: s3cret +- **Server Host:** _IP/hostname of your Asterisk server_ +- **Server Port:** 5060 +- **Transport:** UDP + +### Codecs + +You should also make sure the appropriate codecs are enabled on the device. In +the Yealink web interface, you'll find them under _Account→Codec_. I recommend +enabling these codecs in the following priority: + +1. **G722**, for high-quality local calls +2. **PCMU** (_ulaw_), for dialing out to the PSTN + +Asterisk will automatically transcode G722 down to _ulaw_ if the other side doesn't +support it. You can mess around with even higher quality codecs like Opus, but +in my experience they are not well supported nor easy to transcode. + +### RTP Port Range + +To reduce load on the Asterisk server, you may want your VoIP phone to send and +receive audio streams directly to and from the other party. To do this, you'll +need to configure your router/firewall to forward all incoming RTP traffic for +the device. + +First, give the device a static IP on your local network. Then, configure your +router to port-forward all UDP traffic on your chosen RTP port range to that IP. + +In the Yealink web interface, you can configure a static RTP port range under +_Network→Advanced→Local RTP Port_. + +If you _don't_ do all this, then make sure `endpoint/direct_media` is set to +`no` for the SIP account in `pjsip_wizard.conf`! + +### Voicemail Number + +You'll also want to configure which number the phone should dial when you press +the voicemail button. In the Yealink web interface, set _Account→Advanced→Voice Mail_ +to `*99` (or whatever you number you chose for `VOICEMAIL_NUMBER` above). + +### Busy Lamp Field (BLF) + +You may want to have your phone's LED light up when a given line is on a call. In the +Yealink web interface, you can configure this under _Dsskey→Line Key_. + +For each line you're interested in, set **Type** to _BLF_ and **Value** to the other +party's extension number. + +### Intercom + +For the intercom functionality described in the dialplan above, make sure the phone +is configured to allow auto-answer. In the Yealink web interface, you can configure +this by setting _Features→Intercom→Intercom Allow_ to _on_. + +## VoIP on Android: Linphone + +In the past, Android provided a built-in SIP client. Sadly, [as of Android 12](https://www.xda-developers.com/android-12-killing-native-sip-calling/), +this has been removed. + +After trying all of the SIP apps available in F-Droid, I'm only able to recommend [Linphone](https://f-droid.org/en/packages/org.linphone/). +It works with bluetooth devices, has an intuitive interface, and reliably delivers calls. + +To keep Android from killing the app, you'll need to make sure battery optimizations +are disabled. Go to _Settings→Apps→See All Apps→Linphone→App Battery Usage_ and select +_Unrestricted_. + +When configuring the SIP account in Linphone, use the following settings: + +- **Username:** 6003 _(or your chosen mobile extension)_ +- **Password:** _your chosen SIP account password_ +- **Domain:** _IP/hostname of your Asterisk server_ +- **Transport:** TCP +- **Expire:** 3600 +- **Apply prefix for outgoing calls:** _enabled_ + +You'll definitely want to use the TCP transport for a mobile device. Smartphone +radios are exceedingly efficient at keeping a long-running TCP connection open, +and TCP will reliably deliver your SIP packets even with a poor cellular signal. + +With _Expire_ set to 3600, your phone will wake up every hour to re-establish the +SIP connection. I've never had any connectivity issues with the TCP transport, but +if you're paranoid, you might want to set this to a lower value. + +I've also found the following Linphone settings useful: + +- **Settings→Audio→Echo cancellation:** _disabled_ (most phones have hardware-level echo cancellation) +- **Settings→Audio→Adaptive rate control:** _enabled_ +- **Settings→Audio→Codec bitrate limit:** 128 kbits/s +- **Settings→Audio→Codecs:** _enable PCMU and G722_ +- **Settings→Call→Improve interactions with bluetooth devices:** _enabled_ +- **Settings→Call→Voice mail URI:** \*99 +- **Settings→Advanced→Start at boot time:** _enabled_ + +You may be tempted to hide the persistent notification icon while Linphone +is running. Don't do it! Whenever I've tried to hide this icon, I get tons of +missed calls, and Asterisk reports the device as offline for minutes at a time. +As long I keep the icon visible in the notification area, I don't have any issues. + + +## Closing Thoughts + +For the past few months, I've used this exact setup for my primary phone number, +and I've been pleased with the results. + +If you decide to self-host your own VoIP infrastructure, you'll definitely want +to configure some type of QoS on your router or firewall to prioritize voice +traffic. Otherwise, you'll experience lags and poor audio quality whenever +your network is congested. + +In addition, you may want to investigate encrypting your calls via STRP and SIP +TLS. I don't personally do this, because voice calls are totally in the clear as +soon as you connect to the PSTN anyway. + +If you'd like to check out the configs required for encrypting your calls, or if +you just want to get some ideas for automating your Asterisk configuration, +check out my Ansible role on [GitHub](https://github.com/sacredheartsc/selfhosted/tree/master/roles/asterisk). diff --git a/src/css/style.css b/src/css/style.css index 27d6a7f..858a666 100644 --- a/src/css/style.css +++ b/src/css/style.css @@ -14,6 +14,15 @@ a:visited { color: #941352 } +blockquote { + border-left: 3px solid #ccc; + padding-left: 10px; +} + +dt { + font-weight: bold; +} + header .subtitle { margin-top: -1em; margin-bottom: 21.44px; -- cgit